New adjustable J-Bar. No need to remove from car to adjust. Had 5" drop.
Strong 1" thick aluminum. Comes with toe adjuster, com bearing and rod end. J-Bar is threaded right hand thread.
Designed to be the strongest steel J-Bar on the market, and weighs just a 1/2 pound more than Adjustable Steel J-Bar. No need to remove from car to adjust. Has 6" Drop
Available in three lengths, with either short or long adjuster for additional 1 3/8” of ﬁ ne tuning. Made with 3/4” Moly Rod Ends and Greasable 3/4” Monoball, they feature Out-Pace’s Patented Greasable Rod End System and is...
1 1/4" .095" Heavy Wall Welded Steel Tube with 3/4" Greasable Moly Rod Ends. Powder Coated Black for Long Life.
Fits IMCA Northern Sport Mods
Custom Lengths also available.
Original Jimmy Mars designed aluminum double adjusting J-Bar. Superior in strength, adjustability, and versatility to any other brand on the market. Zero failures in 20 years. Adjust bar length 2in without disconnecting from the frame. This option is the...
Just like our aluminum one, only made out of steel dom tubing, has two inches of adjustment like the aluminum one - just a little heavier.
Two different Body sizes and Adjusters available. Body #1 is 13.5" and Body #2 is 15.5"
Adjusters come in 5.5", 6...
Our billet loop has 1" offset with 3/4" fine thread stud on each end to run tap tubes and heims that will create a panhard bar from 15" to 40" long. Bar comes with two studs and you buy the tap tube lengths that fit your car.
Our Over the Top Panhard Bar give you the ultimate adjustability and strength. We now build 3 versions of this panhard bar with a wider center opening for forward angled bar driveshaft clearance and also a shorter drop for upper link clearance.