This unique mount lets you mount your pull bar to the bottom of your chassis and this becomes your drive shaft loop all-in-one. Includes bolts, washers, nuts, and spacers.
HMS 4-Bar Chassis Plates (rear trailing arm mount) work with HMS 4-link and 3-link suspension cage set ups. Lower bars 13", 14", 15", and 16" long and upper bars 16", 17", and 18". 1/2" bolt holes.
Rivet like a pro with this heavy duty air riveter. Allows fast assembly and repair of body panels. Includes nose pieces for 3/16", 5/32", 1/8", and 3/32" pop rivets.
For 3/16", 5/32", 1/8" and 3/32" rivets
AFCO steel hood pin kits include:
(1) hair pin
(1) scuff plate
(2) jam nuts
(10) - 1-3/16" diameter black aluminum washers
(10) - 1/4"-20 countersunk black grade 8 cap screws
(10) - 1/4"-20 black nylock nuts
These oval track hood scoops protect your air cleaner from dirt and debris and come in a choice of heights and styles. It may look like carbon fiber but it's actually made of durable, high-impact plastic. A molded-in flange allows for easy...
Bolt on style front bumper assembly-welded. 38-1/2" inside diameter, 1-1/2" tube.
Shaw Race Cars Wide Front Modified Bumper fits Shaw Race Cars Modifieds and IMCA Northern Sport Mods. 41 3/8" Wide and mounting holes are 5" apart
Ok, they don’t really explode, but the backside splits into folds so you don’t normally need to use a back-up washer with them. They work great where it’s hard to reach the backside. Choose small or large head and the color of your...
Manufactured from .040 aluminum. These panels do not have a radius at the top. You will need a 90 degree flange on the outside of your interior deck panels to fasten the doors and quarters.
To determine the length, measure from center of hub to back...
Manufactured from .040 aluminum.Flat body panels - You will need a 90 degree flange on the outside of your interior deck panels to fasten the doors and quarters.**These panels do not have a radius at the top**Available in 6 colors.
Round 4130 chromoly steel tubing
1" O.D. x 0.058" wall thickness
Sold in pre-cut tube lengths of 3, 7 or 10 feet
For use in roll cages, race car chassis, roll bars, bumpers, nerf bars, etc.