Replacement Shock Clevis. If you are bending them please take a look at the shock travel. Topping out or bottoming out will bend them. 3/8" bolt included.
These plates are used for Dirt Modifieds, B-Mods, and Stock Cars
Set Up Plates help you make sure your race car is properly aligned. You can use this tool to place all four wheels, check for...
Our Set Up Plates help you make sure your race car is properly aligned. You can use this tool to place all four wheels, check for bump steer, etc.
(2) Front plates(2)...
Body Bracing by Hammond Motorsports. This body bracing has been heat treated making this very strong. I will have this in both Kits and in different lengths.
The Kit comes 3-66" 2-30" 2-26"...
4-Link Suspension Cage is a Steel 4-link Greasable Cage. It has 9 Lower Trailing Arm Heights and 3 Upper Bar Locations.
The Left Rear Complete Cage comes with the (2) Clamp Collars, (2) 45...
HMS Air Cleaner Flat Top Base Black 14 Inch With 1/2 Tall Sure Seal. Fits 4 and 2 barrel carburetors.
Hammond Motorsports Black Flat Top Air Cleaner Lid 14 Inch 5/16 Center Hole
This brake floater has greasable bearings and you can put the trailing arm on top of bottom side. Comes with retainers, brake caliper bolts and bolt nut and spacers for the trailing arm.
Check your caster and camber with ease with the new Hammond Motorsports Caster Gauge. Parts can be sold separate or in a kit.
Tie Rod Component - Inner Tie Rod with Jam Nut
Note the tie rod thread is 11/16 left hand and take tubes that HMS manufactures inhouse.
The bend is on the inner tie rod. What that does on the left is it keeps the ball in the rod end squareness better in left front wheel hike so when the left front comes down, it pulls more...
Hammond Motorsports Plumb Bob Kit. Video coming soon!